Product Solutions


This Heavy Duty Modular Drilling machine handles up to 13 drilling heads and offers far more standard features than most competitive drills. The computerized programmable sliding table handles longer runs, larger paper formats and complex, multiple stroke patterns. Drill positions are programmed using a touch screen for automated drilling control and a variety of jobs. Other standard features include cooling and lubricating for extended drill bit life, stroke and spindle controls, 5 drilling heads and a drill belt as the drilling bed instead of drill sticks.

The modular configuration, allows the machine to be upgraded at any time, a concept unique to Dürselen drills and includes the following upgrades; a manual moving back gauge enabling back gauge to be moved 12" behind the drilling heads, an electronic programmable moving back gauge, an electronic control sliding table (ST feature) and either a manual or electronic back gauge. Trade binderies, print facilities (both digital and offset) will quickly realize the benefits of this feature loaded drill.

PB-16 Standard Configuration Specifications

Drilling heads:   4 heads standard, up to 13 heads or multi-spindle heads
Hole distance:   1 1⁄4” – 16 1⁄2” (31.7 – 420 mm), with multi-spindle drill heads down to 3⁄4” (19.05 mm)
Spine margin behind drills:   2” (50 mm)
Size of front tables:   17 1⁄2” in width x 12 1⁄2” in depth (450 mm x 320 mm)
Manual sliding table:    
Hole Distance:   From 9/32” to 16 1⁄2” (7 to 420 mm)
Hole patterns:   By program index trims with up to 7 hole patterns per trim; one program trim with the most common hole patterns comes with the machine. XXX
Size of sliding table:   17 1⁄2” wide x 12 1⁄2” deep
(450 mm x 320 mm)XX
Traveling distance of Sliding table:   12 1⁄4” (310 mm)
Programming Sliding:  
Hole distance:   3/64” to 16 1⁄2” (1 to 420 mm)
Hole patterns:   Store and recall up to 100 programs, program any hole pattern via touch screen
Size of sliding table:   17 1⁄2” wide x 12 1⁄2” deep
(450 mm x 320 mm)
Traveling distance of Sliding table:   12 1⁄4” (310 mm)
Large back table with manual back stop and optional programmable motorized back stop:
Throat depth behind drill bits:   12” (300 mm)
Positioning:   Depth setting touch screen programmed by motorized back stop, side setting via drill heads
General Features:    
Drill bit diameter:   1/8” – 5/8” (3 – 14 mm), with
special drill heads up to 1 1⁄2” (38 mm)
Maximum pile height:   2” (50 mm), optional 3” (75 mm)
Space requirements:   37 1⁄2” (950 mm) wide, 35” (890 mm) deep, 56” (1,420 mm) high
Power requirements:   400 volts, 3 phase, 50 cycles,
16A, 3 kW
Air consumption for Cooling and lubrication:   100 litres per minute at 2 bar pressure

Technical data is subject to change without notice.