Product Solutions

PB-15 DoD

High Performance Paper Drilling On Demand: Dürselen PB-15 DoD

Paper drilling on demand—that means change of hole pattern, spine margin, and paper size at the touch of a button, without any set-up delay. The paper drilling system Dürselen PB-15 DoD combines maximum flexibility with high output—ideal conditions for modern workflows in digital printing and finishing.

The paper drilling system Dürselen PB-15 DoD processes:

  • Piles of loose leafs
  • Piles of folded sections
  • Piles of perfect bind books
  • Piles of stitched brochures















    ...up to 50 mm/2" (optional 76mm/3") in height. Two drill heads with free positioning programming can produce any hole pattern at the touch of a button with full automated control of paper format and spine margin. This allows for efficient processing of large printing volume, consisting of many different small runs.

    Dürselen Paper Drill PB-15 DoD can run in-line with digital printing and finishing equipment and be used as a stand-alone unit. A special interface allows job definition and setup control via barcode or a networked workflow for in-line operation. Maximum flexibility, continuous workflow, highest process reliability—paper drilling on demand.

    PB-15 DoD Standard Configuration Specifications

    Drilling heads:   2 free positioning drilling heads
    Hole distance:   3/64" - 16 1/2" (1 - 420mm)
    Spine margin behind drills:   3/16" to 1" (5 - 25mm)
    General Features:  
    Drill bit diameter:   1/8" - 5/8" (3 - 14mm)
    Minimum paper size:   4 3/4" X 3 1/4" (120 X 80mm) drilled on the long side
    Maximum paper size:   14 1/2" X 12" (360 X 300mm) drilled on the long side
    Output:   Up to 1,500 piles per hour
    Space requirements (including conveyor):   102" (2,600mm) wide; 95" (2,400mm) deep; 51" (1,300mm) high
    Power requirements:   400 volts, 3 phase, 50-60 cycles, 25A, 7.5 kW
    Compressed air consumption:   250 litres per minute at 6 bar pressure
    Options:  
    Internal impulse lubrication for the paper drill bits
    Drill bit breaking sensors for in-line operation








     







    Technical data is subject to change without notice.